Training
Contact Us to Book Now!
scheduling@p3safetysolutions.com
Active Shooter & Workplace Violence
Delivery: In Person or Remote Video
Duration: 4 Hours
Description: Because active shooter situations are often over within 10 to 15 minutes, before law enforcement arrives on the scene, individuals must be prepared both mentally and physically to deal with an active shooter situation. This class will give guidance and suggestions drawn from the Department of Homeland Security (DHS) and other agencies, which will help an employer and employee be more prepared in such an event. OSHA Section 5(a)(1) “General Duty Clause”. Eye on Safety provided Curriculum.
Competent Rigger Training
Delivery: In Person
Duration: 16 Hours
Certificate: 2 Year Expiration
Description: The Competent Rigger course, offered in our indoor tower training facility, allows students to learn in a controlled environment under close supervision and tutelage of our skilled instructors. Pacific Safety Solutions provided curriculum.
Confined Space Entry Awareness
Delivery: In Person or Remote Video
Duration: 4 Hours
Description: The attendee for this course will be able to evaluate a space to determine if it is classified as a confined space, or a permit required confined space. The methods of hazard control and the roles and responsibilities needed for permit confined space entry. OSHA 1910.146, 1926.1200, ANSI Z117, NFPA 350
Control of Hazardous Energy (Affected)
Delivery: In Person or Remote Video
Duration: 4 Hours
Description: Affected workers may be exposed to injuries from the unexpected energization, startup of the machinery or equipment, or release of stored energy in the equipment. The Lockout/Tagout standard requires the adoption and implementation of practices and procedures to shut down equipment, isolate it from its energy source(s), and prevent the release of potentially hazardous energy. OSHA 1910.147
DOT Title 49 Handling Hazardous Materials
Delivery: In Person or Remote Video
Duration: 4 Hours
Description: Training for employees that interact or have an impact on hazardous material transportation. Discuss the regulations, hazards, and proper handling of these materials. Title 49 CFR 172.704. Eye on Safety provided curiculum.
ES&H Leadership Workshop
Delivery: In Person
Duration: 24 Hours
Minimum: 5 Attendees
Description: The purpose for this group workshop is to establish ES&H leadership abilities for supervisory and management staff. The workshop is designed to provide the participants the tools and techniques used to reduce incidents, behavior-based safety management, and their respective EH&S roles and responsibilities. The primary attendees should include foremen, general foremen, and superintendents. Another non-manual personnel may attend at the direction of their manager.
Fall Protection with Principles for Climbing and Rescue
Delivery: In Person or Remote Video
Duration: 24 Hours
Description: This course was developed for the worker who may climb structures or ladders and works at elevation. The class provides understanding of the fall protection requirements and regulations from the OSHA General Industry and Construction Standards, with added features of Climbing structures, and information on self-rescue and assisted rescue. OSHA 1926.21, 1926.503 ANSI 359, NFPA 1965
Hazardous Communication with GHS
Delivery: In Person or Remote Video
Duration: 4 Hours
Description: The Hazard Communication Standard (HCS) is now aligned with the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). This class provides a common and coherent approach to classifying chemicals and communicating hazard information on labels and safety data sheets. OSHA 1910.1200, 1926.59 Curriculum
NWSA Practical Examination
Delivery: In Person
Duration: 2 Hours TTT-1
1.5 Hours TTT-2
Description: NWSA representatives initially defined two levels of telecommunications tower technicians for crew members who perform general construction activities with an emphasis on tower system installation, modification, maintenance, and inspection of support structures used in telecommunications, including personal wireless communications, public safety communications, utility networks, and broadcast. These two levels were defined as Telecommunications Tower Technician 1 & 2.
Powered Industrial Truck (Forklift)
Delivery: In Person or Remote
Duration: 4 Hour Refresher
8 Hours Initial Operator
Certificate: 3 years
Description: The course will identify risks associated with working on, or near, Powered Industrial Trucks (PIT) and assist employers and operators to eliminate, reduce or control PIT hazards in their workplace. Certificate for Initial Operators will only cover the class and type of PIT at the time of evaluation. OSHA 1910.178
Temporary Traffic Control
Delivery: In Person or Remote Video
Duration: 4 Hours
Description: This course is an awareness course for work zone safety and application of the five zones outlined in the MUTCD Part VI when working in the right of way. Specific barricade, sign, and high-visibility applications with safe practices for roadway workers. Manual of Uniform Traffic Control Devices Part VI
Aerial Lift/MEWP
Delivery: In Person or Remote Video
Duration: 4 Hours Awareness/ Refresher
8 Hours Initial Operator
Description: Training for either vehicle mounted or mobile elevated, rotating and working platforms. This class gives the attendee the information needed for inspection, and safe operation, of the equipment. OSHA 1910.67. 1926. 453 ANSI A92.2, 92.22, 92.24.
Competent Tower Climber
and Rescue Training
Delivery: In Person
Duration: 24 Hours
Certificate: 2 Year Expiration
Description: Developed for experienced climbers who have supervisory level responsibilities on the job site. This course augments the authorized tower climber course through the following: applicable rescue regulations; fall hazard assessments and fall protection procedures; detailed inspection of fall protection and rescue equipment components and systems; determining when systems are unsafe; calculated clearances for various systems; fall protection rescue procedures and the selection and use of non-certified anchorages. Pacific Safety Solutions provided curriculum.
Confined Space Entry with Rescue
Delivery: In Person or Remote Video
Duration: 8 Hours
Description: The attendee for this course will be able to evaluate a space to determine if it is classified as a confined space, or a permit required confined space. The methods of hazard control and the roles and responsibilities needed for permit confined space entry. A hands-on demonstration of PRCS entry and rescue techniques for non-entry rescue of the entrant. OSHA 1910.146, 1926.1200, ANSI Z117, NFPA 350
Control of Hazardous Energy
(Authorized)
Delivery: In Person or Remote Video
Duration: 8 Hours
Description: Authorized workers performing service or maintenance on machinery and equipment may be exposed to injuries from the unexpected energization, startup of the machinery or equipment, or release of stored energy in the equipment. The Lockout/Tagout standard requires the adoption and implementation of practices and procedures to shut down equipment, isolate it from its energy source(s), and prevent the release of potentially hazardous energy. OSHA 1910.147
Fall Protection Awareness
Delivery: In Person or Remote Video
Duration: 4 Hours
Description: An overview and introduction of conventional fall protection regulations, discussing the control methods and personal protective equipment needed for elevated work. OSHA 1926.21, 1926.503 ANSI 359
Fall Protection Advanced Compliance
Delivery: In Person or Remote Video
Duration: 8 Hours
Description: The class provides understanding of the fall protection requirements and regulations from the OSHA General Industry and Construction Standards. This is for the competent person who may be evaluating the differences of fall restraint and fall arrest in the workplace, includes Ladder Safety. OSHA 1926.21, 1926.503 ANSI 359
Front Loader Backhoe
Delivery: In Person
Duration: 8 Hour Awareness/ Refresher
16 Hour Initial Operator
Description: This is operator training for tractors with a front loader bucket and rear excavation arm, commonly known as a Backhoe. This course covers the equipment function, safe movement, loading and unloading and operator controls. The attendee will perform practical operation of the equipment in preparation for production. OSHA 1926.600, 1926.602 1926.604
HAZWOPER
Delivery: In Person or Remote Video
Duration: 8 Hour Awareness / Refresher
24 Hour Initial / 40 Hours for Site Worker
Description: The Hazardous Waste Operations and Emergency Response Standard (HAZWOPER) applies to five distinct groups of employers and their employees. This includes any employees who are exposed, or potentially exposed, to hazardous substances -- including hazardous waste -- and who are engaged in one of the following operations: clean-up operations, corrective actions for RCRA sites, voluntary clean-up operations, operations involving hazardous waste, and emergency response. OSHA 1910.120, EPA 40 CFR 264 & 265 Eye on Safety LLC Provided Curriculum
NWSA TTT-1 Prep Course
Delivery: In Person or Remote Video
Duration: 5 Hours
Description: This training course is designed to prepare telecommunications employees for the NWSA TTT-1 computer-based test and practical examination. Course materials will focus on telecommunication tower systems and their installation, modification, maintenance, and safety. As well as the 6 NWSA domains for the certificate. Sample testing is given during this course. NWSA, ANSI A10.48, TIA -222, TIA -322
Site Assessment & Evaluation (JHA)
Delivery: In Person or Remote Video
Duration: 4 Hours
Description: This course discusses the importance of site assessments and the Job Hazard Assessment process. Step by step JHA development and understanding of site assessments tool and documents. Based on the principal that all hazards can be identified for the safe and well-being of employees, and the jobsite efficiencies through task assessment.
Trench & Excavation Safety
Delivery: In Person or Remote Video
Duration: 4 Hours Awareness
8 Hours for Competent Person
Description: This training course is designed to prepare employees to evaluate hazards related to trenches and excavations, evaluate soil mechanics, and select the appropriate protective system. For Competent Persons authorized by their employers to evaluate and protect excavations from failure. In Person 8-hour course can incorporate live demonstrations or practical setup on site.